Sino Machine

You are here: Home / Archives for Coffy

Coffy

By

Car & Truck Automatic Transmission Parts

Car & Truck Automatic Transmission Parts
An automatic transmission, also called auto, self-shifting transmission, n-speed automatic (where n is its number of forward gear ratios), or AT, is a type of motor vehicle transmission that can automatically change gear ratios as the vehicle moves, freeing the driver from having to shift gears manually. Like other transmission systems on vehicles, it allows an internal combustion engine, best suited to run at a relatively high rotational speed, to provide a range of speed and torque outputs necessary for vehicular travel. The number of forward gear ratios is often expressed for manual transmissions as well (e.g., 6-speed manual).

Linkage disk
Universal joint
Release sleeve
Planet carrier

A manual transmission, also known as a manual gearbox, stick shift, n-speed manual (where n is its number of forward gear ratios), standard, MT, or in colloquial U.S. English, a stick (for vehicles with hand-lever shifters), is a type of transmission used in motor vehicle applications. It uses a driver-operated clutch engaged and disengaged by a foot pedal (automobile) or hand lever (motorcycle), for regulating torque transfer from the engine to the transmission; and a gear selector operated by hand (automobile) or by foot (motorcycle).

Bearing block
Axle hub
Thrust plate
Steering knuckle

A conventional 5-speed manual transmission is often the standard equipment in a base-model vehicle, while more expensive manual vehicles are usually equipped with a 6-speed transmission instead; other options include automatic transmissions such as a traditional automatic (hydraulic planetary) transmission (often a manumatic), a semi-automatic transmission, or a continuously variable transmission (CVT). The number of forward gear ratios is often expressed for automatic transmissions as well (e.g., 9-speed automatic).

Also we offer OEM/ODM truck & car parts. The truck & car parts including truck & car spare parts which Sino Machine Industry supplied were produced per customer’s drawings or specifications. All the parts are made in China. Chinese Castings Serving the Industrial Markets of the World.

By

Pipe & Connection Fittings

A fitting is used in pipe systems to connect straight pipe or tubing sections, adapt to different sizes or shapes and for other purposes, such as regulating (or measuring) fluid flow. “Plumbing” is generally used to describe the conveyance of water, gas, or liquid waste in domestic or commercial environments; “piping” is often used to describe the high-performance (high-pressure, high-flow, high-temperature or hazardous-material) conveyance of fluids in specialized applications. “Tubing” is sometimes used for lighter-weight piping, especially that flexible enough to be supplied in coiled form.

Wheel hub
Rod lug
Valve deck & bonnet
Yoke

Standard codes are followed when designing (or manufacturing) a piping system. Organizations which promulgate piping standards include:
ASME: American Society of Mechanical Engineers
A112.19.1 Enameled cast-iron and steel plumbing fixtures standards
A112.19.2 Ceramic plumbing fixtures standard
ASTM International: American Society for Testing and Materials
API: American Petroleum Institute
AWS: American Welding Society
AWWA: American Water Works Association
MSS: Manufacturers Standardization Society
ANSI: American National Standards Institute
NFPA: National Fire Protection Association
EJMA: Expansion Joint Manufacturers Association
CGA: Compressed Gas Association

Flange mounting
Hinge block
Connecting rod
Bushing

Pipes must conform to the dimensional requirements of:
ASME B36.10M: Welded and seamless wrought-steel pipe
ASME B36.19M: Stainless-steel pipe
ASME B31.3 2008: Process piping
ASME B31.4 XXXX: Power piping
The B31.3 and B31.4 codes have requirements for piping found in petroleum refineries; chemical, pharmaceutical, textile, paper, semiconductor, and cryogenic plants, and related processing plants and terminals. These codes specify requirements for materials and components, design, fabrication, assembly, erection, examination, inspection and testing of piping. The codes are applicable to piping for all fluids, including raw, intermediate and finished chemicals; petroleum products; gas, steam, air and water; fluidized solids; refrigerants, and cryogenic fluids.

Wind power components
Link chain
Locking pin
Pulley

The material with which a pipe is manufactured is often the basis for choosing a pipe. Materials used for manufacturing pipes include:
Carbon (CS) and galvanized steel
Impact-tested carbon steel (ITCS)
Low-temperature carbon steel (LTCS)
Stainless steel (SS)
Malleable iron
Non-ferrous metals (includes copper, inconel, incoloy and cupronickel)
Non-metallic (includes acrylonitrile butadiene styrene (ABS), fibre-reinforced plastic (FRP), polyvinyl chloride (PVC), high-density polyethylene (HDPE) and toughened glass)
Chrome-molybdenum (alloy) steel — Generally used for high-temperature service
The bodies of fittings for pipe and tubing are most often the same base material as the pipe or tubing connected: copper, steel, PVC, chlorinated polyvinyl chloride (CPVC) or ABS. Any material permitted by the plumbing, health, or building code (as applicable) may be used, but it must be compatible with the other materials in the system, the fluids being transported and the temperature and pressure inside (and outside) the system. Brass or bronze fittings are common in copper piping and plumbing systems. Fire hazards, earthquake resistance and other factors also influence the choice of fitting materials.

Shifting arm
Semi-circle block left side
Custom Blocks
Double Bolt Clamps

Also we offer OEM/ODM pipe & fitting parts. The pipe & fitting parts including spare parts which Sino Machine Industry supplied were produced per customer’s drawings or specifications. All the parts are made in China. Chinese Castings Serving the Industrial Markets of the World.

By

Railway parts

Our main railway parts including:

Common front cover
Connecting seat
Safety support
Gear wheel

Hand brake mechanism, Hand brake gearbox, Double brake shoe, Single brake shoe, Brake shoe (Welded type), Grill Handle, Manivela (Crowbar), Hand brake bar, Trangala handle, Portbale for loco engine, Hinge for wagon, Collector protect cap, Termik santral, Implant (Wagon), Elbow (Loco engine), Cap arm, Pinion side external gland cap, Hand brake gear, Bearing cap (Engine), Protecting cap (Engine), Hand wheel (Brake system), Pressure plate (Engine), End pivo (200kg), Suspension rod (60kg), Filter, Bottom locker tongue (Wagon), Upper bearing parts （Wagon bogie）, Bottom bearing parts (Wagon bogie), Handwhell, Pivot bearing, Sand injektor, Bogie center (upper bowl), Sustaint carrier, Crack control, Engine Flange, Engine Ring, Engine Flange Expansion, Off Plate, etc.

 

The moter gear hanger transverse seat
Axle box
Bearing cover
Certer pin

 

Railway part 1
Speed clamp
Traction rod
The front cover

 

Driven gear material basically has 15 Crni6, 17 Crnimo6, 18 Crnimo7-6, 42 Crmo, etc; Forgings from 6kg to 1080kg in weight; Forgings from 164mm to 965mm diameter size; Ranging from the 54mm to 268mm height; Driven gear commonly used tire die forging; Production equipment is mainly 2T and 3T free forging hammer air-steam. Material for 18 crnimo7-6, Weight 1080Kg, Maximum 965mm outside diameter size, Height 268mm. To tire air and steam with the aid of 3T free forging hammer forging production.

Locomotive Driven Gear
Locomotive Driven Gear

Also we offer OEM/ODM railway parts. The railway parts including railway spare parts which Sino Machine Industries supplied were produced per customer’s drawings or specifications. All the parts are made in China. Chinese Castings Serving the Industrial Markets of the World.

By

Machined Parts & Components

Machining is various processes in which a piece of raw material is cut into a desired final shape and size by a controlled material-removal process. It almost always implies the use of machine tools (including power tools and hand tools).

Machining is a part of the manufacture of many metal products, but it also be used on materials such as wood, plastic, ceramic, and composites. Our most machining is carried out by computer numerical control (CNC), in which computers are used to control the movement and operation of the mills, lathes, and other cutting machines.

Also we offer OEM/ODM machined parts. The machined parts including spare parts which Sino Machine Industry supplied were produced per customer’s drawings or specifications. All the parts are made in China. Chinese Castings Serving the Industrial Markets of the World.

By

Investment Castings

Standard Specifications:
ASTM, DIN, BS, Chinese GB

Component Photo Code:
Stainless & Carbon Steel Valves, Hydrants, Coupler & Bundles, Stainless Fittings, Non-ferrous Valve

Machining Capability:
To meet the diversified markets, we can further rough machine or finish machine the castings, forgings and other wrought materials to meet the requirements of our customers.

Typical Components For:
Pumps, Valve, Pipe fittings, Security locks, Washing machines, Boar hardware, Agricultural machinery, Automobile, Motorcycles & Bicycles, Weapon systems, Business machines.

investment casting for trailer parts
investment casting for trailer parts
investment casting for trailer parts

Material:
Carbon & alloy steels, Stainless steels, Wear resistant steel (austenitic manganese steel), Ductile Iron

Melting Equipment:
Electric induction furnace

Surface Preparation:
Passivation, Polishing, Plating, Coating, Painting

Mold Medium:
Colloidal silica shell, Sodium silicate shell

The investment casting parts including spare parts which Sino Machine Industry supplied were produced per customer’s drawings or specifications. All the parts are made in China. Chinese Castings Serving the Industrial Markets of the World.

By

Agricultural gearboxes

Main Application of Agricultural gearboxes:
Saw benches, Belt saws, Manure spreaders, Agriculture machine, Power Dividers, Rotary Cutters, Rotary Slashers, Rotary Mowers, Lift Pumps, Cotton Choppers, Tree Cutters, etc.

Agricultural gearbox Splitter Gearbox for Rotary Mower Machine.
Splitter gearbox Standard Agricultural gearbox series,the power of this gearbox can reaches to 120HP. And the ratio can be customized. 1 3/4”-20 Spline input shaft.
SMI can offer all kinds of rotary mower gearboxes from 30HP to 300HP.
SMI has been producing rotary mower gearboxes since 1996.


Including lawn mower series, rotary tiller series, rice harvester series, grain transportation storage series, etc. SMI Gearboxes has export for numerous country like American, Canada, Australia, India, Poland, etc.

Also we offer OEM/ODM agricultural gearboxes parts. The agricultural gearboxes parts including agricultural gearboxes spare parts which Sino Machine Industries supplied were produced per customer’s drawings or specifications. All the parts are made in China.
SMI Castings Serving the Industrial Markets of the World.