SMI R-Series weight distribution hitch with sway control system
Features:
• Evenly distributes tongue weight to the axles of tow vehicle and trailer for stability and control
– Creates a more level ride for both tow vehicle and trailer
• Friction sway control reduces sway caused by winds, curving roads and sudden maneuvers
– Adjustable tension lets you create the perfect degree of control and resistance
– Integrated handle engages and disengages the system
– Removable – just release 2 spring locking pins
• Round, forged steel spring bars are tapered for superior flexibility
– Bars flex appropriately over uneven terrain for a controlled, even ride
• Adjustable spring-bar tension – just switch links in lift chains to fine-tune
• Desired tilt of head and system is achieved by adding washers to a rivet inside the weight-distribution head
• Solid steel shank is powder coated for rust protection
Specs:
• Tongue weight: 700 lbs to 1,000 lbs
• Gross towing weight: 10,000 lbs
• Fits: 2″ x 2″ trailer hitch receivers rated for use with a weight distribution system
• Shank length: 12-1/2″
• Maximum rise: 6″ from top of hitch receiver opening
• Maximum drop: 2″ from top of hitch receiver opening
• Hitch ball dimensions:
– Diameter: 2-5/16″
– Shank length: 2-1/2″
– Shank diameter: 1-1/4″
Design, Research & Development
SMI G-Series weight distribution hitch
SMI G-Series weight distribution hitch
Features:
• Evenly distributes weight over axles of tow vehicle and trailer for stability and control
– Creates a level ride for both tow vehicle and trailer
• Integrated 4-Point Sway Control limits side-to-side movement
– Brackets keep spring bars in place for a rigid system that holds trailer in line
– Steel-on-steel friction helps to minimize sway caused by winds, curvy roads or sudden maneuvers
– No lift chains – eliminate unwanted movement
• Unique design makes system compatible with surge-type brake actuators
• Spring bars flex for a controlled, even ride
• No-drill, clamp-on brackets can be adjusted along the trailer frame
– Accommodates frame-mounted items such as gas tanks, toolboxes or generators
• Desired tilt is achieved with traditional washer design
– Add or remove washers from spacer rivet to tilt head up or down
• Dipped steel construction is durable and corrosion resistant
• Snap-up lever eases installation by reducing lifting required by trailer jack
Specs:
• Tongue weight: 700 lbs – 1,000 lbs
• Gross towing weight: 10,000 lbs
• Ball size: 2-5/16″
• Fits: 2″ x 2″ trailer hitch receivers rated for use with weight distribution systems
• Lift-bracket positioning: 27″ – 32″ back from center of coupler
• Maximum trailer frame height: 6″
Trailer Jack
Trailer Jack
Portable Crank for trailer jack
Customized Trailer Jack
5000 pound jack parameters
SMI specializes in customizing trailer accessories since 1996, including Weight Distribution & Sway Control System, Flat_bottom Jacks, and Wheeled Jacks, etc. It is very popular in the trailer accessories market in the United States and Australia.
Anode steel claw (Electrolytic claw) | Garra de acero del ánodo (garra electrolítica)
The Anode steel claw is also called electrolysis claw, electrolytic claw, anode steel Yoke, or anode yoke bracket etc.
Cast steel anode yoke
The cast steel anode yoke is an indispensable device in the anode guide rod in the electrolytic aluminum production process, which plays a role in connecting the upper and lower parts. The anode guide rod has an aluminum guide rod above and an anode carbon block underneath, which is the production of anode parts.
Cast steel anode yoke aluminum slag electrolyte
As a consumable, the cast steel anode yoke and its aluminum guide rod will be exhausted after one month of production in the electrolysis workshop. At this time, it is necessary to remove the old anode components and replace them with new ones. However, aluminum slag and electrolyte will remain on the old guide rod. The cleaning of the electrolyte will also be carried out in the anode assembly workshop.
Cast steel anode yoke protection ring
In addition to removing the electrolyte on the periphery of the cast steel anode yoke, it is also necessary to remove the phosphorus iron ring wrapped around the steel claw. Here, the phosphorus iron ring needs to be pressed off for pressure removal treatment, and finally shot blast cleaned up for recycling.
Cast steel anode yoke manufacturing process and production
In addition to recycling, cast steel anode yokes are also professionally produced. Use electric arc furnace and intermediate frequency furnace with rare earth refining to ensure the gas content in the molten steel and ensure the electrical conductivity and strength indicators of its steel claws.
Cast steel anode yoke model
Generally produces parallel three claws, four claws, three-dimensional four claws, six claws, eight claws, double cast steel anode yokes and other models.
Cast steel anode yoke Technical Standard
Cast steel anode yoke is a consumable in the electrolytic aluminum production process, and its consumption level and replacement frequency are generally based on the production limit of the electrolytic workshop. The transfer of the anode assembly can only be operated when the bus bar is lifted and the anode is replaced. Generally, when the anode carbon block is consumed for 15 to 18 days, it is necessary to raise the bus bar once and adjust the anode assembly once.
[Read more…] about Anode steel claw (Electrolytic claw) | Garra de acero del ánodo (garra electrolítica)
Cast Iron Alloying Cage
SMI Cast Iron Alloying Cage
Used for magnesium alloying in aluminum cast house furnaces. Mg capacity: 260kg ~ 650 kg
Casting Alloy Cage, Magnesium Alloying Cage For Aluminum Furnace Equipment.
Application:
Using for adding alloy into aluminum cast house furnaces. For example magnesium, manganese, nickel and so on into aluminum furnaces. Attach the cage to a long pole. And the other end can be lifted using a forklift to add the required alloy to the furnace.
Place of Origin: China
Model Number: According to customer’s specifications
Application: Aluminum Industry
Material: Casting Alloy Steel
Capacity available: 260kg ~ 650kg
Got free quote today: inquiry@sinomachine.org
Jaula de aleación de hierro fundido
Se utiliza para la aleación de magnesio en hornos domésticos de fundición de aluminio. Capacidad de Mg: 260 kg ~ 650 kg
Jaula de aleación de fundición, jaula de aleación de magnesio para equipos de hornos de aluminio.
Aplicación:
Se usa para agregar aleación en hornos domésticos de fundición de aluminio. Por ejemplo, magnesio, manganeso, níquel, etc., en hornos de aluminio. Sujeta la jaula a un poste largo. Y el otro extremo se puede levantar con una carretilla elevadora para agregar la aleación requerida al horno.
Aplicación:
Se usa para agregar aleación en hornos domésticos de fundición de aluminio. Por ejemplo, magnesio, manganeso, níquel, etc., en hornos de aluminio. Sujeta la jaula a un poste largo. Y el otro extremo se puede levantar con una carretilla elevadora para agregar la aleación requerida al horno.
Lugar de origen: China
Número de modelo: ¡De acuerdo con las especificaciones del cliente!
Aplicación: Industria del aluminio
Material: fundición de acero aleado
Capacidad disponible: 260 kg ~ 650 kg
Obtuve una cotización gratis hoy: inquiry@sinomachine.org
Daily Design Works- Agriculture gearboxes
Fine works on Agriculture gearboxes – Rotary Lawn Mower Series Products:
agriculture parts -1
agriculture parts -2
Rotary Lawn Mower Series Products, 30-40 lawn mower -1
Rotary Lawn Mower Series Products, 30-40 lawn mower -2
Rotary Lawn Mower Series Products, 30-40 lawn mower -3
Rotary Lawn Mower Series Products, 30-40 lawn mower -4
Rotary Lawn Mower Series Products, 30-40 lawn mower
Rotary Lawn Mower Series Products, 50-60 lawn mower
Rotary Lawn Mower Series Products, 70-80 lawn mower
SMI （Sino Machie Industry）serving the industrial markets of the world.
You must be logged in to post a comment.