The Technical Specifications of Anode Yoke Bracket:
The cast Anode yoke is made from cast steel alloy, normalized and in accord with BS3100 Grade A1. The maximum value for equivalent carbon (CEV), based on the mill test, shall be 0.35 CEV and shall be calculated using the following formula:
CEV =C+ Mn/6 + (Cr+Mo+V) /5 + (Ni+Cu) /15
Machined Surface Finish
The cast surface of the yoke to be in contact with the transition joint shall be machined (as per Anode yoke drawing). The casting shall be stress free prior to machining. The Manufacturer shall ensure the geometry with respect to the stubs (straightness and perpendicular) meet the requirements detailed on the drawings. The remaining surfaces shall be left in a smooth “As-Cast” condition typically Ra 12.5 to Ra 25. Grooves on stubs shall be cut or ground, as per Anode yoke drawing.
The chemical composition specification of the steel is shown as below:
[gallery type="rectangular" ids="2742,2743,2744,2745"] Aluminum Dross Press: For the aluminum cast house. Designed by Guru in… Read More
[gallery type="rectangular" ids="2999,3000,3001" orderby="rand"] Aluminum Dross Cooling Pan The aluminum dross cooling pan is designed… Read More
Alloy Steel Sow Mold SMI has been supplying aluminum recycling equipment to the aluminum industry… Read More
[gallery type="rectangular" columns="2" ids="2748,2749"] Aluminum Dross Transport Equipment Sow moulds For the aluminum ingots and… Read More
A532-Class II Casting Parts A highly wear-resistant cast iron material For manufacture ore crusher, ball… Read More
The correct combination of the press head (cooling head) and the dross pan is essential… Read More